Tuesday, April 8, 2008

Virus Infection Strategies And Their Solution

Infection strategies:-
In order to replicate itself, a virus must be permitted to execute code and write to memory. For this reason, many viruses attach themselves to executable files that may be part of legitimate programs. If a user tries to start an infected program, the virus' code may be executed first. Viruses can be divided into two types, on the basis of their behavior when they are executed. Nonresident viruses immediately search for other hosts that can be infected, infect these targets, and finally transfer control to the application program they infected. Resident viruses do not search for hosts when they are started. Instead, a resident virus loads itself into memory on execution and transfers control to the host program. The virus stays active in the background and infects new hosts when those files are accessed by other programs or the operating system itself.
Nonresident viruses:-
Nonresident viruses can be thought of as consisting of a finder module and a replication module. The finder module is responsible for finding new files to infect. For each new executable file the finder module encounters, it calls the replication module to infect that file.
Resident viruses:-
Resident viruses contain a replication module that is similar to the one that is employed by nonresident viruses. However, this module is not called by a finder module. Instead, the virus loads the replication module into memory when it is executed and ensures that this module is executed each time the operating system is called to perform a certain operation. For example, the replication module can be called each time the operating system executes a file. In this case, the virus infects every suitable program that is executed on the computer.Resident viruses are sometimes subdivided into a category of fast infectors and a category of slow infectors. Fast infectors are designed to infect as many files as possible. For instance, a fast infector can infect every potential host file that is accessed. This poses a special problem to anti-virus software, since a virus scanner will access every potential host file on a computer when it performs a system-wide scan. If the virus scanner fails to notice that such a virus is present in memory, the virus can "piggy-back" on the virus scanner and in this way infect all files that are scanned. Fast infectors rely on their fast infection rate to spread. The disadvantage of this method is that infecting many files may make detection more likely, because the virus may slow down a computer or perform many suspicious actions that can be noticed by anti-virus software. Slow infectors, on the other hand, are designed to infect hosts infrequently. For instance, some slow infectors only infect files when they are copied. Slow infectors are designed to avoid detection by limiting their actions: they are less likely to slow down a computer noticeably, and will at most infrequently trigger anti-virus software that detects suspicious behavior by programs. The slow infector approach does not seem very successful, however.

Vectors and hosts:-
Viruses have targeted various types of transmission media or hosts. This list is not exhaustive:
1.Binary executable files (such as COM files and EXE files in MS-DOS, Portable Executable files in Microsoft Windows, and ELF files in Linux)
2.Volume Boot Records of floppy disks and hard disk partitions
3.The master boot record (MBR) of a hard disk
4.General-purpose script files (such as batch files in MS-DOS and Microsoft Windows, VBScript files, and shell script files on Unix-like platforms).
5.Application-specific script files (such as Telix-scripts)
6.Documents that can contain macros (such as Microsoft Word documents, Microsoft Excel spreadsheets, AmiPro documents, and Microsoft Access database files)
7.Cross-site scripting vulnerabilities in web applications
8.Arbitrary computer files. An exploitable buffer overflow, format string, race condition or other exploitable bug in a program which reads the file could be used to trigger the execution of code hidden within it. Most bugs of this type can be made more difficult to exploit in computer architectures with protection features such as an execute disable bit and/or address space layout randomization. PDFs, like HTML, may link to malicious code.[citation needed]
It is worth noting that some virus authors have written an .EXE extension on the end of .PNG (for example), hoping that users would stop at the trusted file type without noticing that the computer would start with the final type of file. (Many operating systems hide the extensions of known file types by default, so for example a filename ending in ".png.exe" would be shown ending in ".png".)

Methods to avoid detection:-
In order to avoid detection by users, some viruses employ different kinds of deception. Some old viruses, especially on the MS-DOS platform, make sure that the "last modified" date of a host file stays the same when the file is infected by the virus. This approach does not fool anti-virus software, however, especially that which maintains and dates Cyclic redundancy check on file changes.
Some viruses can infect files without increasing their sizes or damaging the files. They accomplish this by overwriting unused areas of executable files. These are called cavity viruses. For example the CIH virus, or Chernobyl Virus, infects Portable Executable files. Because those files had many empty gaps, the virus, which was 1 KB in length, did not add to the size of the file.
Some viruses try to avoid detection by killing the tasks associated with antivirus software before it can detect them.
As computers and operating systems grow larger and more complex, old hiding techniques need to be updated or replaced. Defending a computer against viruses may demand that a file system migrate towards detailed and explicit permission for every kind of file access.

Avoiding bait files and other undesirable hosts:-
A virus needs to infect hosts in order to spread further. In some cases, it might be a bad idea to infect a host program. For example, many anti-virus programs perform an integrity check of their own code. Infecting such programs will therefore increase the likelihood that the virus is detected. For this reason, some viruses are programmed not to infect programs that are known to be part of anti-virus software. Another type of host that viruses sometimes avoid is bait files. Bait files (or goat files) are files that are specially created by anti-virus software, or by anti-virus professionals themselves, to be infected by a virus. These files can be created for various reasons, all of which are related to the detection of the virus:
1.Anti-virus professionals can use bait files to take a sample of a virus (i.e. a copy of a program file that is infected by the virus). It is more practical to store and exchange a small, infected bait file, than to exchange a large application program that has been infected by the virus.
2.Anti-virus professionals can use bait files to study the behavior of a virus and evaluate detection methods. This is especially useful when the virus is polymorphic. In this case, the virus can be made to infect a large number of bait files. The infected files can be used to test whether a virus scanner detects all versions of the virus.
3.Some anti-virus software employs bait files that are accessed regularly. When these files are modified, the anti-virus software warns the user that a virus is probably active on the system. Since bait files are used to detect the virus, or to make detection possible, a virus can benefit from not infecting them. Viruses typically do this by avoiding suspicious programs, such as small program files or programs that contain certain patterns of 'garbage instructions'.
A related strategy to make baiting difficult is sparse infection. Sometimes, sparse infectors do not infect a host file that would be a suitable candidate for infection in other circumstances. For example, a virus can decide on a random basis whether to infect a file or not, or a virus can only infect host files on particular days of the week.

Stealth:-
Some viruses try to trick anti-virus software by intercepting its requests to the operating system. A virus can hide itself by intercepting the anti-virus software’s request to read the file and passing the request to the virus, instead of the OS. The virus can then return an uninfected version of the file to the anti-virus software, so that it seems that the file is "clean". Modern anti-virus software employs various techniques to counter stealth mechanisms of viruses. The only completely reliable method to avoid stealth is to boot from a medium that is known to be clean

Self-modification:-
Most modern antivirus programs try to find virus-patterns inside ordinary programs by scanning them for so-called virus signatures. A signature is a characteristic byte-pattern that is part of a certain virus or family of viruses. If a virus scanner finds such a pattern in a file, it notifies the user that the file is infected. The user can then delete, or (in some cases) "clean" or "heal" the infected file. Some viruses employ techniques that make detection by means of signatures difficult but probably not impossible. These viruses modify their code on each infection. That is, each infected file contains a different variant of the virus.

Encryption with a variable key:-
A more advanced method is the use of simple encryption to encipher the virus. In this case, the virus consists of a small decrypting module and an encrypted copy of the virus code. If the virus is encrypted with a different key for each infected file, the only part of the virus that remains constant is the decrypting module, which would (for example) be appended to the end. In this case, a virus scanner cannot directly detect the virus using signatures, but it can still detect the decrypting module, which still makes indirect detection of the virus possible. Since these would be symmetric keys, stored on the infected host, it is in fact entirely possible to decrypt the final virus, but that probably isn't required, since self-modifying code is such a rarity that it may be reason for virus scanners to at least flag the file as suspicious.
An old, but compact, encryption involves XORing each byte in a virus with a constant, so that the exclusive-or operation had only to be repeated for decryption. It is suspicious code that modifies itself, so the code to do the encryption/decryption may be part of the signature in many virus definitions.
Polymorphic code:-
Polymorphic code was the first technique that posed a serious threat to virus scanners. Just like regular encrypted viruses, a polymorphic virus infects files with an encrypted copy of itself, which is decoded by a decryption module. In the case of polymorphic viruses however, this decryption module is also modified on each infection. A well-written polymorphic virus therefore has no parts which remain identical between infections, making it very difficult to detect directly using signatures. Anti-virus software can detect it by decrypting the viruses using an emulator, or by statistical pattern analysis of the encrypted virus body. To enable polymorphic code, the virus has to have a polymorphic engine (also called mutating engine or mutation engine) somewhere in its encrypted body. See Polymorphic code for technical detail on how such engines operate.
Some viruses employ polymorphic code in a way that constrains the mutation rate of the virus significantly. For example, a virus can be programmed to mutate only slightly over time, or it can be programmed to refrain from mutating when it infects a file on a computer that already contains copies of the virus. The advantage of using such slow polymorphic code is that it makes it more difficult for anti-virus professionals to obtain representative samples of the virus, because bait files that are infected in one run will typically contain identical or similar samples of the virus. This will make it more likely that the detection by the virus scanner will be unreliable, and that some instances of the virus may be able to avoid detection.
Metamorphic code:-
To avoid being detected by emulation, some viruses rewrite themselves completely each time they are to infect new executables. Viruses that use this technique are said to be metamorphic. To enable metamorphism, a metamorphic engine is needed. A metamorphic virus is usually very large and complex. For example, W32/Simile consisted of over 14000 lines of Assembly language code, 90% of which is part of the metamorphic engine.
Vulnerability and countermeasures
The vulnerability of operating systems to viruses
Just as genetic diversity in a population decreases the chance of a single disease wiping out a population, the diversity of software systems on a network similarly limits the destructive potential of viruses.
This became a particular concern in the 1990s, when Microsoft gained market dominance in desktop operating systems and office suites. The users of Microsoft software (especially networking software such as Microsoft Outlook and Internet Explorer) are especially vulnerable to the spread of viruses. Microsoft software is targeted by virus writers due to their desktop dominance, and is often criticized for including many errors and holes for virus writers to exploit. Integrated applications (such as Microsoft Office) and applications with scripting languages with access to the file system (for example Visual Basic Script (VBS), and applications with networking features) are also particularly vulnerable.
Although Windows is by far the most popular operating system for virus writers, some viruses also exist on other platforms. Any operating system that allows third-party programs to run can theoretically run viruses. Some operating systems are less secure than others. Unix-based OS's (and NTFS-aware applications on Windows NT based platforms) only allow their users to run executables within their protected space in their own directories.
An Internet based research revealed that there were cases when people willingly pressed a particular button to download a virus. A security firm F-Secure ran a half year advertising campaign on Google AdWords which said "Is your PC virus-free? Get it infected here!". The result was 409 clicks.
As of 2006, there are relatively few security exploits targeting Mac OS X (with a Unix-based file system and kernel). The number of viruses for the older Apple operating systems, known as Mac OS Classic, varies greatly from source to source, with Apple stating that there are only four known viruses, and independent sources stating there are as many as 63 viruses. It is safe to say that Macs are less likely to be targeted because of low market share and thus a Mac-specific virus could only infect a small proportion of computers (making the effort less desirable). Virus vulnerability between Macs and Windows is a chief selling point, one that Apple uses in their Get a Mac advertising. That said, Macs have also had security issues just as Microsoft Windows has, though none have ever been fully taken advantage of successfully in the wild.
Windows and Unix have similar scripting abilities, but while Unix natively blocks normal users from having access to make changes to the operating system environment, older copies of Windows such as Windows 95 and 98 do not. In 1997, when a virus for Linux was released – known as "Bliss" – leading antivirus vendors issued warnings that Unix-like systems could fall prey to viruses just like Windows. The Bliss virus may be considered characteristic of viruses – as opposed to worms – on Unix systems. Bliss requires that the user run it explicitly (so it is a trojan), and it can only infect programs that the user has the access to modify. Unlike Windows users, most Unix users do not log in as an administrator user except to install or configure software; as a result, even if a user ran the virus, it could not harm their operating system. The Bliss virus never became widespread, and remains chiefly a research curiosity. Its creator later posted the source code to Usenet, allowing researchers to see how it worked.

The role of software development:-
Because software is often designed with security features to prevent unauthorized use of system resources, many viruses must exploit software bugs in a system or application to spread. Software development strategies that produce large numbers of bugs will generally also produce potential exploits.

Anti-virus software and other preventive measures:-
Many users install anti-virus software that can detect and eliminate known viruses after the computer downloads or runs the executable. There are two common methods that an anti-virus software application uses to detect viruses. The first, and by far the most common method of virus detection is using a list of virus signature definitions. This works by examining the content of the computer's memory (its RAM, and boot sectors) and the files stored on fixed or removable drives (hard drives, floppy drives), and comparing those files against a database of known virus "signatures". The disadvantage of this detection method is that users are only protected from viruses that pre-date their last virus definition update. The second method is to use a heuristic algorithm to find viruses based on common behaviors. This method has the ability to detect viruses that anti-virus security firms have yet to create a signature for.
Some anti-virus programs are able to scan opened files in addition to sent and received e-mails 'on the fly' in a similar manner. This practice is known as "on-access scanning." Anti-virus software does not change the underlying capability of host software to transmit viruses. Users must update their software regularly to patch security holes. Anti-virus software also needs to be regularly updated in order to prevent the latest threats.
One may also prevent the damage done by viruses by making regular backups of data (and the Operating Systems) on different media, that are either kept unconnected to the system (most of the time), read-only or not accessible for other reasons, such as using different file systems. This way, if data is lost through a virus, one can start again using the backup (which should preferably be recent). If a backup session on optical media like CD and DVD is closed, it becomes read-only and can no longer be affected by a virus. Likewise, an Operating System on a bootable can be used to start the computer if the installed Operating Systems become unusable. Another method is to use different Operating Systems on different file systems. A virus is not likely to affect both. Data backups can also be put on different file systems. For example, Linux requires specific software to write to NTFS partitions, so if one does not install such software and uses a separate installation of MS Windows to make the backups on an NTFS partition, the backup should remain safe from any Linux viruses. Likewise, MS Windows can not read file systems like ext3, so if one normally uses MS Windows, the backups can be made on an ext3 partition using a Linux installation.

Recovery methods:-
Once a computer has been compromised by a virus, it is usually unsafe to continue using the same computer without completely reinstalling the operating system. However, there are a number of recovery options that exist after a computer has a virus. These actions depend on severity of the type of Virus.

Virus removal:-
One possibility on Windows XP and Windows Vista is a tool known as System Restore, which restores the registry and critical system files to a previous checkpoint. Often a virus will cause a system to hang, and a subsequent hard reboot will render a system restore point from the same day corrupt. Restore points from previous days should work provided the virus is not designed to corrupt the restore files. Some viruses, however, disable system restore and other important tools such as Task Manager and Command Prompt. An example of a virus that does this is CiaDoor.
Administrators have the option to disable such tools from limited users for various reasons. The virus modifies the registry to do the same, except, when the Administrator is controlling the computer, it blocks all users from accessing the tools. When an infected tool activates it gives the message "Task Manager has been disabled by your administrator.", even if the user trying to open the program is the administrator.
If your system is a Microsoft product and you have your 20 digit registration number, you can go to the Microsoft web site, and they will do a free scan and most likely remove any known virus such as Trojan win32.murlo.

Operating system reinstallation:-
Reinstalling the operating system is another approach to virus removal. It involves simply reformatting the OS partition and installing the OS from its original media, or imaging the partition with a clean backup image (taken with Ghost or Acronis for example).
This method has the benefits of being simple to do, can be faster than running multiple anti-virus scans, and is guaranteed to remove any malware. Downsides include having to reinstall all other software as well as the operating system. User data can be backed up by booting off of a LiveCD or putting the hard drive into another computer and booting from the other computer's operating system.

No comments:

Post a Comment